TESTING 1.0206.01, Руководство по эксплуатации

Страница: 6 / 57

Laboratory mortar mixer
1.0206.01
6
Danger
The packaging materials (plastic, polystyrene, screws, nails, wood,
etc.) must be kept away from children. They must be
disposed of properly.
Caution Before you dispose of the packaging, please check if accessories,
instructions, documents and spare parts
remain inside the packaging.
After unpacking the device, make sure that the mortar mixer has not been damaged in
any obvious way during transport. If in doubt, do
not plug in the device and contact your
seller.
1.4. Transport by hand
The mortar mixer can be transported to its intended destination by hand.
Its weight is about 62 kg.
To lift the mortar mixer, the lower handles, which are attached to the side of the load
centre, are designed for a 40 kg load capacity.
Lateral T-handles attached on the upper rear area serve to stabilise the load during car-
rying.
If taken by hand, the mortar mixer can be conveniently transported to its final location and
set down.
The handles are exclusively used for transporting the mortar mixer by hand. They are not
attachments to be used for transport by lifting equipment.
2. Scope of delivery
Pos. Amount Description Serial number
1. 1 Mortar mixer (including operating instructions) 1.0206.01
2. 1 Stainless steel stirrer 1.0203.02EN
3. 1 Stainless steel bowl 1.0203.03EN
4. 1 Feed hopper for liquid or powder aggregates 8.0144
5. 1
Sand feed (including 2 cylinder screws with
hexagon socket and tool)
1.0203-05