TESTING 1.0206.01, Руководство по эксплуатации, Страница: 37 / 57

Laboratory mortar mixer
1.0206.01
37
F7
Close the sand feed
F7

Pressing F7 closes the sand feed, and the time dis-
play simultaneously stops.
F5

Press F5 to start low speed.
10.5. Fill the water reservoir
Behind the mortar mixer on the table top of the stainless steel table is a filling possibility
for the mixed water. Here, the funnel supplied can be inserted and the mixed water
filled. When filling in, make sure that the pre-storage tank for the mixed water is not
overfilled.
10.6. Setting the dosage
In the display menu, to select "Manual mode" or "Automatic mode", select one of the
buttons F3 or F4. Now you can make a rough preselection (200 ml = F5, 300 ml = F6,
400 ml = F7, 500 ml = F8). If you want to make a finer adjustment, press F3 to activate
the selected value (the background will now flash), then change the value with F1 or F2.
If the desired dosage is set, save it with F3. With F4 back to the working menu.
10.7. Activate water dosing
By pressing the F4 key, the mixing water, in manual operation, is conveyed to the mix-
ing trough. When the preselected quantity of mixed water has completely run into the
mixing trough, the valve will be closed automatically.
By pressing the F4 key, after the start of a program with water supply, the standard
quantity (EN 196 = 225 ml) is supplied. If the F4 key is not pressed, mixing water will
not be fed into the mixing trough.