TESTING 1.0206.01, Руководство по эксплуатации

Страница: 17 / 57

Laboratory mortar mixer
1.0206.01
17
6.3. Lowering and removing the mixing bowl
Loosen the right hand lever at the right side of the mortar mixer and push it to the front
as far as it will go. The mixing bowl lowers.
The container holder is in the lowered position. Turn the mixing pot on the side handles
anti-clockwise until the two arrows on the mixing pot and on the container holder are
perpendicular to each other. Lift the mixing pot upwards and slightly tilted forward until
the clamping jaw is no longer in the container holder. Now tilt the mixing pot backwards
and pull it out.
6.4. Loosening and removing the mixer
Use the left hand to hold the mixer and firmly hold the cord ring of the mixer attachment
with the right hand.
Release the cord ring anti-clockwise until it can be moved upwards. Now pull the mixer
downwards.
6.5. Inserting and tightening the mixer
Insert the mixer into the snap closure of the mixer with a slight rotary motion until the stop
is detected. Hold the mixer with the left hand and turn the cord ring until it drops approx.
10 mm downwards. Now tighten the cord rings by turning them clockwise with the right
hand.
6.6. Inserting and tightening the mixing bowl
The container holder is in the lowered position. Use the side handles to use the mixing
pot. The red arrow must point forwards. The mixing pot must be inserted in such a way
that both arrows on the mixing pot and on the container holder are placed one above
the other. Let it lean forward slightly and allow the mixing pot to slide easily. To lock, the
mixing pot is tightened clockwise.
6.7. Placing the mixing bowl in the mixing position
Move the hand lever to the right, then backwards until it stops and lock to the left.
The mixing bowl is locked in the mixing position.