49
Test-Um NT955 Series
3.4. Using Template Files
Each time you create a New Job, select a previously created template
with Contractor Information and/or Custom Cable Definitions to avoid
reentering information. (Figure 3.6)
1. From the Start screen, select
Auto Test
.
2. Using the arrow key, navigate to
Job Utilities
and press
Select.
3. On the Job utilities screen, select
New
.
4. Enter a name for your job in the Filename box using the
alphanumeric keypad. Press Accept. You must create a
Filename. If you do not create a new Filename a Warning
Message appears advising that the “Filename is empty.”
Press OK to go back and create a Filename for the job.
5. Press Select to display the existing template files.
6. Select a template that has been previously created or select
Default for a blank template.
7. Press OK (F3) when finished. Your new job that has been
created will be your current job.
Filename:
Template File:
New File
Untitled1.job
Default.tut
DELETE
OK
BACKSPC
Test-Um Inc.
validator
100%
2005 Aug 25
10:53:01
Example
Default.tut
Template01.tut
Template02.tut
Figure 3.6 Selecting a Template File
Validator
TM
Managing Job Files
Validator
TM
Managing Job Files
