32
Test-Um NT955 Series
1.3. Shutdown Timeouts
A Power Save mode is installed in Validator-NT to conserve battery life
(see Figure 1.4). When the pre-set time limit is reached without any key
input the main unit screen will begin to blink. Pressing any key will bring
back the full screen and reset the timer.
Select preferences for the timeframes in minutes that you wish the
Backlight, the Validator-NT Operating System, and the Tone Generator
to automatically shutdown and timeout in order to preserve battery
life. Click the down arrow on each drop down dialog box and select the
number of minutes desired before each function turns off. Press Accept,
then press Set (F1) to initiate your selections and return to the Setup
screen.
System Shutdown (min):
Shutdown Screen
Untitled1.job
15
Backlight Shutdown (min):
30
15
Tone Generator Timeout (min):
Set
Test-Um Inc.
validator
Shutdown
Untitled1.job
100%
Test-Um Inc.
validator
2005 Aug 25
10:53:01
Figure 1.4 Shutdown Settings
Validator
TM
Setting Up the Test Tool
Validator
TM
Setting Up the Test Tool
