20
OSD Screen Setup
•
VIDEO : Indicates that the system is in video test mode.
•
NTSC : Indicates if input or output video signal system is NTSC or
PAL. Input video signal is output on LCD screen by automatic
checking without a special setup key, and output video signal
system in Pattern Generator mode can be switched to NTSC or
PAL, using or key.
•
B[][][][] : Indicates screen brightness, and the brightness increases
gradually by +1 when key is pressed, and decreases
gradually by -1 when key is pressed. And it returns to the
initial setup value when one of the two keys is pressed for more
than 3 sec.
•
C [][][][] : Indicates screen sharpness, and the brightness increases
gradually by +1 when key is pressed, and decreases
gradually by -1 when key is pressed. And it returns to the
initial setup value when one of the two keys is pressed for more
than 3 sec.
19
Enter the PATTERN GENERATION MODE when key is pressed in
VIDEO mode.
Output video system is changed to NTSC or PAL, using
or key.
Output pattern can be seen COLOR BAR, RED, BLUE, GREEN
or its reverse order, using or key.
Press key as PATTERN GENERATION MODE returns to Video
MODE.
COLOR BAR RED BLUE GREEN
