APPENDIX
53
Interface
Handler interface*
Signal: START TTL input
Signal: LOW, HIGH, FAIL, PASS, EOT, READY total 6 TTL
outputs.
(This function is valid only under the resistance
measurement mode and the compare mode is enabled.)
Scan*
Signal: READY, PASS, LOW, HIGH, CLOCK, STRB total 6
TTL outputs.
(This function is valid only under the resistance
measurement mode and the compare mode is enabled.)
RS-232+ GPIB (option) IEEE488.1-1987, IEEE488.2-1992 and SCPI-1994
* The Scan and Handler interface use the same
connector
Environmental
Operation
Environment
Indoor use, altitude up to 2000m.
Ambient Temperature 0
˚
C to 40
˚
C.
Relative Humidity 80% (Maximum).
Installation category II
Pollution Degree 2
Storage temperature -10
˚
C to 70
˚
C.
General
Power source
AC 100V/120V/220V/230V
±
10%, 50/60Hz, 27VA, 22W.
Accessories
Test Lead × 1, User manual × 1,
Programmable manual × 1 (option),
Temperature sensor (option) × 1
Dimension
251(W)×91(H)×291(D) mm
Weigh
Approx. 3 kg
