GOM-802
User
Manual
20
Zeroing (Relative Function)
Background
The Relative function is used to perform a zero
adjustment on the test leads.
After the Relative value is pre-set, each measurement that
is displayed is equal to the actual value – relative preset
value.
If the measured value minus the relative value is a
negative, a minus sign is shown on the MSB (most
significant bit). At low measurement speeds the minus
sign will alternate with the displayed measurement.
1. Short the
cables
Short the test
cables together
using a short thick
copper wire if
necessary.
1. Set the
Reference value
Press the REL
%VALUE
key.
2. Relative mode
display appears
REL
Indicates the Relative function is active
Note
The Auto-range function will be disabled when using
compare mode with the relative function.
