Tesmec AFS404, Установка, эксплуатация и обслуживание

Страница: 6 / 108

PULLER-TENSIONER
Model: AFS404
Manual: MI-AFS404-609-01-GB Date: 15.03.2016 Author: MC Page: 3 of 35
2. GENERAL DATA AND PRESCRIPTIONS
2.1 MANUFACTURER
TESMEC S.p.A.
Via Zanica, 17/O
24050 - GRASSOBBIO
BG - ITALY
tel. (+39)-035-4232911
fax (+39)-035-4522445
e-mail: info@tesmec.it
Via Pertegalli, 2
24060 - ENDINE GAIANO
BG - ITALY
tel. (+39)-035-825024
fax (+39)-035-826375
e-mail: info@tesmec.it
2.2 COMMUNICATIONS WITH THE MANUFACTURER
For any information related to the machine (use, maintenance, spare parts) always state Model, Serial
Number, Manufacturing Year and Order. These data can be found in the machine-identifying table.
2.3 TYPOLOGY AND USING FIELD
Puller-tensioner mod. AFS404 is suitable for stringing no. 1 or 2 bundled conductors with max.
diameter of 34 mm and for recovering no. 1 or 2 ropes with 16 mm in diameter with a connector with
max. diameter of 48 mm.
The machine is controlled by a hydraulic system that allows the machine to automatically work in
PULLER or in TENSIONER mode.
The power transmission to the large groove bull-wheels is transmitted through a closed hydraulic
circuit with a variable delivery pump and fixed displacement motor, with the possibility to change
continuously the speed in both rotating directions.
A hydraulic vacuum brake stops automatically the two bull-wheels should the work be interrupted and
a damage in the hydraulic circuit occur.
The machine is equipped with rapid couplers for connection to all types of reel winders and reel
elevators made by Tesmec; the frame is complete with a rigid axle for towing at max. 30 km/h.
2.4 PERFORMANCES
PULLER PERFORMANCES
Max. pull 45 kN
Speed at continuous pull 2,9 km/h
Max. speed 5 km/h
Pull at max. speed 25 kN
TENSIONER PERFORMANCES
Max. tension 45 kN
Max. speed 5 km/h
ATTENTION: the use of ropes with smaller diameter will reduce the pulling capacity of
the machine, in accordance with the breaking load of the rope or of the conductor.
Performances are referred to the machine without optional, at sea level and at 20°C.