Tesmec AFS404, Установка, эксплуатация и обслуживание

Страница: 32 / 108

PULLER-TENSIONER
Model: AFS404
Manual: MI-AFS404-609-01-GB Date: 15.03.2016 Author: MC Page: 29 of 35
6. SAFETY CONDITIONS
6.1 SAFETY DEVICES
Machine has been equipped with the following safety devices:
1. load-limiting device with automatically stop of the endothermic engine once the max. pre-set load
value has been exceeded
2. mechanical negative safety brake for movement stop in case of lack of hydraulic pressure
3. timing case and protections on moving parts, where technologically possible.
DANGER: it is absolutely forbidden the use of the machine without protecting timing
cases or with damaged/disconnected safety devices.
ATTENTION: after a serious emergency use of the negative safety brake, check the wear
condition of the discs and the efficiency of the brake itself; if necessary, replace the brake
discs before re-using the machine.
6.2 EMERGENCY STOP DEVICE
The machine is equipped with an emergency stop device (table 3, pos. 2) that directly acts on the
Diesel engine.
The power generator locking causes the intervention of the vacuum brakes and, consequently, the
complete machine stop.
ATTENTION: use the emergency stop device ONLY in danger situations for the operators'
safety.
NOTE: for restoring the machine it is necessary to unlock the emergency device with a
deliberate manoeuvre (turn for a quarter, in clockwise direction, the push-button).
The emergency stop device for stopping the machine while working must only be used in
emergencies.
6.3 PERIODIC OPERATIONS
Daily, before starting the work, the operator has to verify the functionality of the machine safety
devices.
ATTENTION: do not modify for any reason safety devices of the machine because the
manufacturer declines any responsibility as consequence of the non-functioning of the same.