Tesla TT26EX21-0932IA, Руководство пользователя

Страница: 11 / 352

11
ENG
Cooling mode
Heating mode
Dry mode
Fan mode (not FAN button)
Auto mode
To activate the cooling function (COOL) , press the MODE button until
the symbol COOL appears on the display.
The cooling function is activated by setting the button or at a
temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust the temperature
(1), the speed (2) and the direction of the air flow (3) by pressing the
button indicated.
To activate the heating function (HEAT) , press the MODE button until the symbol HEAT appears on the display.
With the button or set a temperature higher than that of the room.
To optimize the function of the Air conditioner adjust the temperature (1), the speed (2) and the direction of the air
flow (3) by pressing the button indicated.
To set the DRY mode, Press MODE until DRY appears in the display. An automatic function of alternating cooling
cycles and air fan is activated.
To set the FAN mode, Press MODE until FAN appears on the display.
To activate the AUTO mode of operation, press the
MODE
button on the remote controller until the symbol
AUTO appears on the display. In AUTO mode , the air conditioner will run automatically according to the room
temperature.
In HEATING operation, the appliance can automatically activate a defrost cycle, which is
essential to clean the frost on the condenser so as to recover its heat exchange function.
This procedure usually lasts for 2-10 minutes during defrosting,indoor unit fan stop
operation. After defrosting ,it resumes to HEATING mode automatically.
WARNING!
The cooling function allows the air condit- ioner to cool
the room and at the same time reduces Air humidity.
The heating function allows the air conditi- oner to heat
the room.
This function reduces the humid- ity of the air to make the
room more comfortable.
The air conditioner works in only ventilation.
Automatic mode.