Tesla RoboStar T80 Pro, Руководство пользователя

Страница: 48 / 51

SOLVING PROBLEMS
Problem Cause Solution
1
The vacuum
cleaner battery
can not be
charged.
The vacuum cleaner is not
properly parked in the charging
base.
Ensure that the charging
contacts are properly connected
when parked in the charging
base.
The charging base is not
connected to the mains and the
vacuum cleaner is turned on by
the main switch.
The charging base should
always be connected to the
mains, do not switch it off. The
vacuum cleaner is then always
ready for further cleaning with a
fully charged battery.
The battery is completely
discharged.
Activate the battery. Place the
vacuum cleaner manually in the
charging dock, then disconnect
it from the dock after 3 minutes.
Repeat 3 times and then let the
battery recharge normally.
2
The vacuum
cleaner has been
trapped during
cleaning.
The vacuum cleaner has been
trapped in a small area, the
loose brushes have been drilled
on the cleaning brushes, such as
power cords, curtains, carpets
etc.
The vacuum cleaner
automatically tries to release if it
is not able to clear the obstacle
yourself.
3
The vacuum
cleaner interrupts
cleaning and
prematurely
returns to the
charging base.
If the battery level drops, the
vacuum cleaner switches
automatically to the recharge
mode dock and returns to the
charging base.
Normal status, let the vacuum
cleaner charge to full battery
capacity and start cleaning
again.
The operating time varies
depending on the floor surface,
room complexity and the
selected cleaning mode.
Normal state, no need to deal
with.
4
The vacuum
cleaner does not
start cleaning as
planned.
The vacuum cleaner is off or the
battery is running low. Turn on the vacuum cleaner and
recharge the battery.
You did not save the planned
cleaning in the vacuum cleaner's
memory.
Re-enter the time and day into
the vacuum cleaner's memory
and make sure the vacuum
cleaner is fully charged.
The vacuum cleaner is blocked.
Turn off the vacuum cleaner and
clean it.