Warning: Riding in a moving vehicle with
the seat back reclined can result in
serious injuries in a collision, as you could
slide under the lap belt or be propelled
into the seat belt. Ensure the backs of
occupied seats are reclined no more than
30 degrees when the vehicle is moving.
Folding Second Row Seat Backs
(Bench Seats)
The second row seat backs on bench seats
can be folded fully forward so they lay flat and
maximize cargo space. Pull up the mechanical
lever located on the side of each outboard
seat (the same lever you use to recline the
seats, as described above), then push the seat
back fully forward. The bench seats have a
60/40 split—therefore, the adjustment lever
on the left side folds the seat backs for both
the left and center seats, whereas the lever on
the right folds the rightmost seat back only.
Note: Before folding seats fully forward,
remove any items from the seats and the rear
footwell. To allow the seat backs to fold
completely flat, you may need to move the
front seats forward.
Moving Second Row Bench Seats
Note: Only bench seats in seven-seat vehicles
can be moved forward and rearward. The
bench seats in five-seat vehicles are stationary.
Use the mechanical lever located beneath
each outboard seating position to move the
second row seats forward or rearward. The
bench seats have a 60/40 split—therefore, the
lever on the left side moves the seat for the
left and center seats, whereas the lever on the
right side moves only the rightmost seat. Pull
and hold the lever while moving the seat
forward or rearward. Release the lever when
the seat is at the desired location.
Note: You can adjust the position of bench
seats using the mechanical levers only. You
cannot use the touchscreen to adjust bench
seats.
Accessing Third Row Seats (if
equipped) - Monopost Seating
A third row ingress button is located on the
backrest of each second row outboard
monopost seat. This button makes it easy for
passengers to enter and exit the third row
seating positions. Touch Controls > Seats >
Easy Entry and choose how you want this
button to work:
•
ON - Allows you to tilt and move the
associated outboard seat fully forward,
and the center seat partially forward, with
a single-press of the button.
•
OFF - When off, which is recommended if
a child seat is installed in the second row,
you must hold the button to move the
second row seats forward.
Front and Rear Seats
26
Model X Owner's Manual
