21 G-TECH/Pro SS/RR Fanatic Manual
After setting the START/FINISH gate, G-TECH will switch to
map recording and now you need to drive the track. You
will see a screen with message as shown here.
After a few seconds message will clear from screen as
shown here
Note:
If you are setting the START/FINISH gate from stop, you will have 5 seconds to accelerate your car and continue
driving down the track. If you keep your vehicle on START/FINISH line for more than 5 seconds, RR Session recording will
be aborted.
While driving the track G-TECH will show you the running lap time, current speed and G-force bar-graph.
Figure 18: Recording map, screen elements
During map recording you can place additional gates for
dividing the track into segments. To do that, just press
REC
button any time. G-TECH will confirm that new gate
was accepted by displaying appropriate message as
shown on the next screen
Note:
In order to prevent accidental adding of multiple gates, there is a 5 seconds guard time between two successive
gates. This restriction applies for gates added during the map recording. After the race you have an option to set
additional gates wherever you like. For details on editing gates, please see page 43.
