Tesla 43T609SUS, Руководство пользователя

Страница: 7 / 48

7
ENG
Installing the batteries
Using the remote control
FIRST TIME INSTALLATION
NOTE: Pictures are only for reference. Actual items may differ. Fig.5
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries’ polarity to avoid short circuit.
2. When the battery’s voltage is insufficient which affect the use range, you should replace it with a new
battery. Remove the batteries from the remote‑control unit if you do not intend to use it for a long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
• Use the remote control by pointing it towards the remote sensor. Items between the remote control and
the remote sensor could block normal operation.
• Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control, also
do not put the remote control in a high humidity place.
• Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
• When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so,
please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.
After all connections have been made properly, switch your TV on. The language selection will appear on the
screen. Use
 to select the Language of your preference and select your country, confirm with OK. The
“Welcome screen” appears, please confirm with OK. Here you can choose where you are using the TV. For
normal use, you can use the Home setting. After you selected the setting which fits for your usage, confirm
with OK. The Legal statement will appear, please read them and continue with I agree.
The installation will proceed to the Internet Connection screen, choose between Setup or Skip and confirm
with OK. If you choose Setup you will be forwarded to the network configuration screen; with Skip you
automatically jump one screen further and you are able to choose the correct time zone.
On the following screen, you can select the Antenna scan type, choose the one you like to use and follow the
on‑screen instructions. Select which input source you want to use: DTV to receive digital terrestrial broadcasts
or ATV for analogue terrestrial reception. Other tuners can be set‑up if you choose for to Skip. Select Cable
to receive digital or analogue cable broadcasts or Satellite to receive digital satellite broadcasts (if you have a
satellite dish).
26. GUIDE Press to display the current EPG information in DTV mode.
27. PRE‑CH Return to previous channel.
28. FAV Press to view your assigned favourite channels.
29.
5
Press to fast reverse.
30.
6
Press to fast forward.
31.
7
Press to play the previous file.
32.
8
Press to play the next file.
33.
4
No function.
34.

2
Press to pause playback, press again to continue playback.
35.
3
Press to stop playback.
36.
Select audio language