Tesla 43T609SUS, Руководство пользователя

Страница: 8 / 48

8
ENG
DVB-T2 installation
DVB-C installation
ATV installation
Terrestrial Setting
Press MENU and select Channel Scan by pressing OK. First use the  buttons to enter the Country menu
and select the country you are living in, confirm with OK and return to the previous menu with the BACK
button.
Use the
 buttons again to go to the Tuner Type menu and by pressing  you can select Antenna,
confirm with OK. The TV will now search for digital channels.
After choosing the Antenna option, go to Auto Tuning and choose between DTV, ATV or both scan options.
Select one and confirm by pressing the OK button; with BACK you return to the previous menu.
Cable Setting
Press MENU and select Channel Scan by pressing OK. First use the  buttons to enter the Country menu
and select the country you are living in, confirm with OK and return to the previous menu with the BACK
button.
Use the
 buttons to go to Tuner Type menu and by pressing  again in the menu you can select
Cable, confirm with OK. The TV will now search for cable channels.
After selecting the Cable option, go to Auto Tuning and choose between DTV, ATV or both scan options.
Select one and confirm by pressing the OK button; with BACK you return to the previous menu.
If you selected the DTV Channel scan, you can use
  to choose between Full, Network or Quick scan. With
the Network scan you can fill out the base frequency settings, obtained from your provider. If you are ready,
go to Scan option and press OK to start searching.
Analogue cable setting
Press MENU and select Channel Scan by pressing OK. First use the

buttons to enter the Country menu and
select the country you are living in, confirm with OK and return to the previous menu with the BACK button.
Use the

buttons to go to Tuner Type menu and by pressing

again in the menu you can select
Antenna/Cable, confirm with OK; with BACK you return to the previous menu.
After you have selected the Antenna/Cable option, go to Auto Tuning menu and choose ATV tuner, confirm by
pressing the OK button. The TV will search for analogue channels.
Channel Type Choose between Free & Scramble and Free.
Service Type Select DTV to search DTV channels only, or All for a complete search.
Network Search Network Scan on the selected satellite.
Clear DB Choose between All or OFF if you want to delete channels that were previously
saved during the installation of new channels.
DVB-S/S2 installation
Satellite Setting
Press the MENU button and select Channel Scan by pressing OK.
Use the

buttons to go to Tuner Type menu and by pressing

again in the menu you can select
Satellite, confirm with OK and press BACK to return to the previous menu.
Channel Search
Use the  buttons to choose Auto Tuning and press OK to confirm. The default setting is ASTRA 19.2.
Use  if you like to select a different satellite signal and press OK to confirm.
With the  buttons you can decide which scan options shall be used:
It is recommended to use the default settings. Then select Auto Scan and press OK to proceed. Scanning a full
satellite may take a while to complete. You have the same possibilities with the DTV ‑ Manual Tuning process.
NOTE: Network Scan: This function allows you to search for the NIT data of the corresponding satellite to receive
newly appeared channels. Please consider that unlike Astra 19.2 or HOT BIRD 13° some satellites do not offer this
function or only support it partly. If you have any questions, please contact your dealer or the service/service hotline.