Teseq NSG 437 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Teseq NSG 437 Скачать руководство пользователя страница 7

7

The instrument must not be used for any purpose other than testing the ESD
immunity of electronic equipment.

The construction of the simulator is not designed for use in an explosive envi-
ronment.

Each electrostatic discharge produces powerful electro-
magnetic interference.

Nearby electronic equipment can be seriously disrupted
unless the appropriate counter-measures are taken.
Perform ESD tests preferably in a shielded room.

If a network needs to be exchanged, the test has to be

stopped first, followed by a waiting time of at least 5 s

to ensure the voltage being internally discharged.

The instrument must not be opened. Repairs, maintenance work and internal

adjustments are only to be carried out by a qualified service engineer.

Use the instrument only in dry surroundings. Any condensation that occurs
must be allowed to evaporate before putting the simulator into operation. Long
periods of exposure to sunlight and excessive warming by external energy
sources are to be avoided.

Do not continue to use the instrument should any mechanical damage occur.
The instrument‘s housing and the cable have both an insulating and a screen-
ing function, which can only be assured while the housing is intact. Return a
damaged simulator to a Teseq service centre immediately for repair.

Teseq Luterbach, Switzerland and the associated sales organization accept
no responsibility for personal or material damage nor for any consequential
damage that results from irresponsible operation of this instrument.

«
...
5
6
7
8
9
...
»

Содержание NSG 437













































Отзывы:

Нет отзывов