Teseo PA 5840 Series, Руководство пользователя

Страница: 21 / 34

21
4.7 The compensation button
CAPACITIVE This mode is specifically designed for capacitive and/or
reactive loads. This reduced bandwidth, high stability mode
is perfect for using during normal transient testing, conducted
sine wave (CSW) testing. The bandwith in this mode is limited
to approximately 3 kHz.
HIGH FREQ This mode is for testing where high bandwidths are required.
This mode allows frequencies up to 150 kHz.
CAUTION! As with all fast amplifiers, the user should
monitor the DUT to ensure no ringing or excessive over-
shoot is present that could result in damage to the DUT
or couplers. In case there is a question the “CAPACI-
TIVE” mode should be used.
Pressing this button toggles between the available compensation modes.
STANDARD This is the normal operating mode with a good compromise
between stability and bandwidth. The bandwidth in this
selection is approximately 40 kHz.