Teseo PA 5840 Series, Руководство пользователя

Страница: 15 / 34

15
This inputs may be used in special applications when the NSG 5000 series is
not used. Another function generator may be used to control the DC amplifier.
1 V input is 7 V output.
The U INPUT is the driving voltage of the battery simulator. The output of the
battery simulator can be described as U OUTPUT = U INPUT x GAIN
I INPUT is the analog control of the current limit. The input limitation is 1-10 V as
a ration of the available current limit where 1 V = 10% and 10 V = 100% current
limit. For example, for a PA 5840-150, which has a maximum constant current
of 50 A, a 5 V input will set a current limit of 25 A, and a maximum peak current
of 75 A when the “CURRENT LIMITATION” selection is 3x I CONTROL.
CAUTION! If used, the input voltage at the I Input con-
nector must be at least 1 V (10% output limitation).
CAUTION! Do not use both I Input and control con-
nectors at the same time. Use either the I Input BNC
connector or the I Input of the control D-Subconnector.
Never terminate the I input BNC or D-Sub connectors!
3.4.4 The output connectors