Teseo PA 5840 Series, Руководство пользователя

Страница: 16 / 34

16
PA 5840
3.4.5 The power output connectors
The “POSITIVE / NEGATIVE POWER” connectors are used to connect the output
to the DUT (device under test) or to the NSG 5000 series.
NOTE! See the hardware guide of the appropriate test
system for more details.
3.4.6 The sense output connectors
The “SENSE” connectors may be connected to compensate for voltage drop of
the cables to the DUT or to the NSG 5000 series.
3.4.7 Rear panel connectors
The connectors on the rear panel normally are configured by the factory. Please
ensure the connections are made as shown in the picture below.
NOTE! The PA 5840-300 has two output connectors
(modularity). For greatest accuracy. Please use the
upper connector