Teseo CBA 100M-1100, Руководство пользователя

Страница: 10 / 20

10
CBA 100M-1100 User Manual
If supplied with 3-phase mains in star connection, a neutral line must
be supplied.
In delta configuration, no neutral is required.
This equipment is intended for rack mounting, using suitable tray and runners
etc. The individual modules must not be mounted only by the front panels.
Typically, the amplifier will be supplied ready assembled in a cabinet. However,
if supplied in separate units for shipping convenience, the assembly procedure
is as below.
Arrangement of modules in cabinet.
This amplifier is supplied with a 34 U instrument rack ready for the insertion
of the modules.
The modules should be arranged with the power unit at the bottom, then two
amplifier units, then the amplifier input/output unit, then two further amplifier
units, and finally the amplifier switch unit. The amplifier units are distinguished
only by the length of DC supply cable, and so should be ordered from bottom
to top such that the unit with the shortest supply cable is at the bottom, and
the unit with the longest supply cable is at the top. For convenience and ease
of assembly, a 1U spacer panel is supplied for insertion between each unit.
Cable connection
Connect the centre unit supply cable from the power unit to the centre unit.
Connect each of the amplifier modules to the power unit using the connectors
and cables supplied. Connect the SMA to SMA RF cables from each of the
outputs on the centre unit, to the connectors on each of the amplifier units, and
similarly for the N to N cables The order of connection is arbitrary. Connect the
BNC to BNC cables from the centre unit to each of the amplifier units.