CORDING THE BLIND
For ease of assembling the rail is pre-corded.
A
Working vertically from where each cord will drop
from the cord guides, thread the cord through the
pocket tape. After the last row of pocket tape thread
a hook on cord toggle onto each cord.
B
Using an upward motion as shown, thread the hook
on cord toggle into the last row of pocket tape.
DO NOT ALLOW THE CORDS TO BECOME TWISTED.
With the blind held in a level, vertical position, adjust
the hook on cord toggles so that equal tension is held
on each and they are level. Trim any excess cord at a
distance of 4cm from the hook on cord toggles.
DO NOT KNOT THE CORDS.
Should the cords ever become detached please ensure
when replacing that they are aligned vertically and that
the hook oncord toggles have equal tension on each
and they are level.
STEP 13
ATTACHING BLIND TO THE HEADRAIL
Line up the blind/loop tape with the hook tape on the
headrail and press firmly to secure the blind in place.
STEP 12
FIXING THE SUPPORTS
A
The brackets are designed for face or top fixing to
frame, wall or ceiling.
B
Mark through the screw holes the position for the
cam supports making sure they are level and in line,
check with a spirit level.
With the brackets removed, drill each bracket screw
position. Fix brackets into place using screws provided,
check alignment and level as you go. Use the wall
plugs provided for plaster and masonary walls.
We recommend for plaster walls a wooden batten
be secured first.
STEP 11
Use Cassette Roman Blind Kit
Need some more help?
Talk to our customer service experts
on
01782 566 666
fabrics
HANGING THE HEADRAIL / REMOVING
A
With the cam supports in the unlocked position,
mount the headrail onto the supports by resting the
front lip of the headrail onto the front of the supports.
B
Secure by sliding the lever on the cam supports into
the locked position.
STEP 14
a
11
b
a
b
4cm
14
lock
unlock
side view
lever rear
located under headrail
a
b
