TERRY TSL1000, Руководство пользователя

Страница: 7 / 16

CONTROLS
Location
• Lower level control switch(standard installation)-mounted on
control post.
Or
• Lower level control switch (pit installation / side entry)
mounted on the building structure at the lower level.
• Platform control switch-mounted on lift platform power pack
cover (mounted on handrail if side entry).
• Upper level control switch (no upper level gate) mounted on
the building structure at the upper level.
Or
• Upper level control switch (upper level gate) integral with the
gate frame.
Function
• All controls are of the “hold to run” type. Maintain pressure
on the switch until the lift reaches the upper or lower level.
To travel in the opposite direction, release the switch, wait 2
seconds and press again.
• A master switch, which “locks” all controls to prevent
unauthorised use is fitted to the charger box.
• If the lift has been supplied with a remote control lift enabler
unit the lift will remain disabled until key fob is pressed.
Pressing the key fob will allow the lift to be operated by the
up/down control in the normal way. 3 minutes after pressing
the key fob the lift will automatically revert back to its disabled
mode preventing further use. The lift can then only be
reactivated for use by repressing the key fob.
7