background image

INTRODUCTION

Thank you for choosing the Terry TSL1000 lift, designed and 
manufactured in the U.K. using the latest technology from Terry  
Group Ltd.  We want you to get the most out of your TSL1000 Lift 
and to help in this aim, we have produced this small booklet on 
operation and maintenance of the equipment which we trust you 
will find helpful.

It is hoped that any queries you may have during day to day 
operation will be answered in the text but if you do have any 
problems our technical help service is only a phone call away.

We hope that our product gives you many years of reliable 
service.

Peter Morrey
Managing Director

DESCRIPTION

The Terry TSL1000 Lift is designed to transport a 

single person 

in a wheelchair

 between two floor levels up to 1 metre apart. 

To provide the lifting force the lift uses a hydraulic cylinder under 
the platform, fed via a hose from a pump unit mounted under 
the power pack cover on the platform. Principal features of the 
design are its low closed height and silent smooth operation. The 
low closed height eliminates the need for a pit.

Control stations are provided on the platform power pack and 
at the upper and/or lower levels depending on requirements. A 
remote control enabler option is also available to limit the use of 
the lift to authorised users only.

4

Содержание TSL1000

















Отзывы: