Terrasat Rx 1+1, Руководство по эксплуатации

Страница: 73 / 174

Ethernet
|
5-11
Telnet
Telnet is a simple text-based program that enables you to connect to another computer
by using the Internet. You can connect to the Rx 1+1 system using a Telnet client from
the host PC. Telnet uses the ASCII command set listed in
Appendix D, ASCII
Command/Response Structure . The default port for Telnet is 23. Characters are
echoed back to the user. The response format varies depending on the message type. If
the verbose setting is used, the response contains formatting characters which display
neatly to the user. If the terse setting is used, the response contains no formatting
characters and is terminated with LF and CR. If verbose mode is used, the response is
terminated with
RX1+1>
.
To initiate a Telnet session,
1. Activate a command prompt window from the host computer.
2. Type
Telnet 192.168.1.254
3. A cursor should appear on the left of the screen.
4. Type the password command
CPE=1234
The response will be
RX1+1>_
.
You can now use ASCII commands to access functionality. For more information
about ASCII commands, see
Appendix D, ASCII Command/Response Structure .
Embedded Web Pages
You can access embedded Web pages that contain status and configuration
information.
To initiate a session,
1. Activate a Web browser window from the host computer.
2. Type the Rx 1+1 system IP address, and then press Enter.
A login page then appears. After login, you have a choice of nine Web pages with
monitoring, control, and alarm information
More information about the embedded Web pages can be found in Appendix E, Web
Pages .
SNMP
The Rx 1+1 system supports SNMP version 1.0 protocol. The SNMP agent listens on
Port 161 for SNMP messages and uses Port 162 for transmitting trap information.
SNMP ca be configured from the HHT, RS232, Telnet, Web pages, FSK, and RS485
interfaces.