Terrasat Rx 1+1, Руководство по эксплуатации

Страница: 107 / 174

Using a Saved Connection
|
C-7
20. Type
CIP
and then press Enter.
This command displays the TCP port used for Telnet communications.
Your screen should resemble the one shown in Figure C.7 .
Figure C.7
Active HyperTerminal Window
21. To end the HyperTerminal session, choose File → Exit.
The system will prompt you to confirm that you want to end the session. If this is
correct, click
Yes
. If not, click
No
.
22. If you clicked
Yes
to end the session, the system will prompt you about saving the
session settings you input beginning with Step 3 . Click
Yes
to save the named
connection.
The HyperTerminal session is now complete.
Using a Saved Connection
To begin a new HyperTerminal session using a named connection,
1. From the Windows Start menu, choose Start → All Programs → Accessories →
Communications → HyperTerminal.
A blank New Connection window with a Connection Description window (similar
to
Figure C.1 on page C-2 ) appears.