TerraKing 45-0592, Руководство оператора

Страница: 11 / 28

11
Adjusting Chain Tension
4. Remove bolt (E) and lift bottom of shield until it is
rotated about 90° and pull out.
5. Loosen three bolts (F) and slide the motor mount plate
rearward. The slack-side (G) tension should be 1/4” to
5/16” (6mm to 8mm) of midspan movement.
Re-tighten three bolts.
Chain Lubrication
Schedule chain lubrication:
• Apply lubrication upon removal from storage
• Reapply lubrication every 20 hours of use
• Apply lubrication prior to storage
Cleaning
To protect from corrosion, clean spreader after every use
with warm water and mild detergent.
Do not leave material in the spreader.
Maintenance
E
1/4” to 5/16”
F
G
Volume...................................................5 cu ft (.14 cu m)
Material Capacity.....................................350 lbs (159 kg)
Weight (empty, 3 point)..............................191 lbs (87 kg)
Weight (empty, 2” receiver)........................180 lbs (82 kg)
Weight (maximum, full)............................540 lbs (245 kg)
Weight of rotor tray.......................................48 lbs (22 kg)
Width..........................................................49 in (125 cm)
Depth (3 point)..............................................25 in (64 cm)
Depth (2” receiver)........................................31 in (79 cm)
Height...........................................................28 in (71 cm)
Spreading Width.........................................43 in (109 cm)
Electrical........................................................12 volt / 25A
Specifications