WEIGHING-ONLY OPERATION
1. Step onto the scale and stand still while the weight is computed (Fig.1).
2. The screen displays the weight (Fig.2).
3. The scale turns off automatically after a few seconds.
BODY FAT AND TOTAL BODY WATER ESTIMATING OPERATION
1. Set User Memory
Press the [
] key to enter body fat and total body water estimation mode.
The memory number will blink (Fig.3). Press the [
▲
] or [
▼
] to select user
memory (1-4). Press [
] to confirm.
2. Set Height
The height blinks (Fig.4). Press the [
▲
] or [
▼
] key to adjust the height. When
Height is correct, press [
] to confirm.
3. Set Age
The age blinks (Fig.5). Press the [
▲
] or [
▼
] key to adjust the age. When Age
is correct, press [
] to confirm.
4. Set Gender
The gender icon blinks (Fig.6). Press the [
▲
] or [
▼
] key to toggle between male
[
] and female [
]. When Gender is correct, press [
] to confirm.
5. Set Normal or Athlete
The Normal icon blinks (Fig.7). Press the [
▲
] or [
▼
] key to toggle between
Normal (N) or Athlete (A). The Athlete mode is not applicable for age under 15.
After choose, press [
] to confirm.
6. Measuring
All personal information stored into memory will be displayed. Then, the scale
shows “0.0” (Fig.8). Step on the scale with bare feet and stand still while the
weight is being measured.
7. Weight, body fat percentage and total body water percentage will be displayed 2 times sequentially (Fig.9).
The scale turns off automatically after a few seconds.
EN
ELECTRONIC BATHROOM SCALE - BODY FAT ANALYZER
DESCRIPTION DU PRODUIT
TO RECALL SETTINGS FROM MEMORY
1. While the power is off, press the
[
] key to turn the scale on. The memory number blinks, press the [
▲
] or
[
▼
] key to select the memory locations. Wait for 2 seconds so that the screen displays the height, age, gender,
normal or athlete stored into memory, then «0.0» (Fig.8).
2. Follow steps 6-7 in the section
BODY FAT AND TOTAL BODY WATER ESTIMATING OPERATION WITH USER
MEMORY
.
TO TURN OFF THE SCALE
If no key has been pressed for around several seconds, the scale turns off automatically.
SPECIAL DISPLAYS
Display
In the case of:
Err0
Incorrect initialization: Press lightly on the scale platform. The
symbols “0000” appear, then disappear. Weigh yourselves
again!
Err1
Unstable weight: begin again.
Err2
Overload: remove weight immediately.
Err3
Measurement error. Begin again.
Lo
Battery failure: replace it.
WARRANTY
This impedance scale is guaranteed for 2 years against defects in materials or manufacturing. During this period,
any such defects will be repaired free of charge (proof of purchase must be shown in the case of a complaint
under warranty). The warranty does not cover damage resulting from improper use or negligence. In the event
of a claim, first contact the shop where you purchased your scale.
PROTECT THE ENVIRONMENT
Dispose of used batteries in a designed container so that they can be collected and recycled. Do not mix
different types of batteries. Do not mix new and used batteries.
After life, dispose of this product at a designated waste recycling point.
Fig.9
17
Notice LINER.indd 17
05/03/12 10:38
