4
System diagnostics information. Exclamation mark and red circle indicates that there is a
problem with device and user attention is required. Click on this icon to see the detailed
diagnostics errors description window.
Download and read the latest device user manual by clicking on this icon.
Currently logged-in user name is shown at the top right WEB configuration window side. You can
log-out anytime from the WEB configuration window by pressing on the log-out icon.
Device name. This name can be changed if you click on the current device title text.
5.1 Home
This is the default page of the device when the user logs into the control panel.
Figure 3. Connection diagram.
Figure 3 shows all possible connections and their states. If there is a problem with the connection, the line is
shown in red color and the notification text describing the problem is displayed in the diagnostics information
window. Depending on the device setup, some connections may not be displayed. For example, if no storage
location is specified, neither the USB nor the network drive will be displayed.
The list on the right side shows the video stream viewers list that are currently watching or recording video. If
SRT protocol is used, mark
is displayed in the corner. If video content is being recorded, a mark
will be displayed.
5.2 RF inputs
Before watching TV programs, you must scan all RF channels or insert RF channels frequencies manually.
5.2.1 Antenna settings
The RF input
[1]
connector can supply the power to the preamplifier. The power can be turned on/off as
shown in Figure 4. See device technical specification for voltage value and current limitations.
Figure 4. Preamplifier power.
