2
3. External view
Rear view
Front view
Figure 1. External view of the streamer.
1
–
RF IN
– RF signal (antenna) input connector. F type;
2
–
10/100Mb ETH
– IPTV and WEB control interface. RJ45 socket;
3
–
USB
– USB connector for video records storage. USB-A socket;
4
–
Reset
– device reset and restore defaults button (see description at section 6);
5
–
DC IN
– DC powering entry for 3.5/1.3 mm DC jack;
6
– device status indication light;
4. Installation instructions
Read the safety instructions first.
Connect antenna or cable signal source to the RF input
[1]
.
Plug Ethernet cable
[2]
and connect to the home router or personal computer.
Connect device power supply to the device DC-IN connection
[5]
and plug the power supply to the mains.
4.1 WEB browser requirements
Streamer supports the following WEB browsers:
• Chrome starting from version 66
• Opera starting from version 53
• Safari starting from version 12.1
• Firefox starting from version 53
• Edge starting from version 80
Internet Explorer is not supported.
4.2 Requirements for video records storage
• SSD or USB memory stick is recommended. HDD usage is not recommended;
• If the USB drive consumes more than 2.5 W (500 mA) of power, it must be powered through an external power
source;
• USB Memory stick must be capable of writing to at least 120 Mbit/s;
• While writing DO NOT detach the drive from the device. This can corrupt files or the drive itself;
