background image

8

 

5.4.

  Transport Streams

One channel at a time can be configured in this page. Select proper channel from the list at „Choose input channel“ 

combobox (see Figure 11 “Transport streams page”).

Figure 11. Transport streams page

A list of services in the selected channel will appear. „List of services“ table shows a list of available services. Icon before 

th

e service name indicates service type. Bitrate of each service is measured in real time. Services that currently are not 

running will be displayed as grayed. They can be selected and will be outputted normally when the services starts to running. 

„LCN“ field is a Logical Channel Number. Every service can have a „channel number“ and TV will sort channels according to 

it. Just ensure, that all services in all channels have different numbers. Value 0 means, that LCN for that service is not used 

at all and TV will sort these channels according to it’s own rules. If channel numbers are added, but TV does not recognize 

it, check the following:

- If TV supports LCN?

- If Network ID and Original Network ID values are valid for the country, which is selected on TV?

„Enable“ dropbox enables the service to the selected output.

“Descramble” checkbox enables or disables descrambling.

Press onto „+“ sign and service information will be extended (see Figure 12 "Service details").

Figure 12. Service details

“Service title“ and “Service provider“ can be edited (multilanguage character support). „Scrambled flag“ will be inserted 

into SDT (Service Description Table). Unchecking this checkbox will not descramble the content. It only carries information 

about the scrambling status of the service. 

"Service type": this is an 8-bit field specifying the type of the service. The assignment of service type value for a Service 

is described in EN 300 468.  It shall be coded according to Figure 13. 

"Parental control": this selection enables ability to restrict certain content viewable by the user. For example, parental control 

field is set to "Less than 6 years", than all content with maturity rating above 6 years old will be filtered out.

Содержание S3C32VB




















Отзывы: