background image

1

 

1.

  Product description

The transmodulator is designed for digital transmodulation with Transport Stream Processing. Device enables services 

filtering, remultiplexing, modifying SI (Service Information), generating NIT (Network Information table), LCN (Local Channel 
Number), restamping PCR (Program Clock Reference). All of the configurations can be changed using the Web Interface.

The transmodulator can be used as a stand alone unit - headend 

with redundant power supply (PS) to increase reliability 

of supply voltages.

S3C32VB

 – headend with 32 DVB-S/S2 input channels and 16 agile DVB-C output channels.

S3C32WB

 – headend with 32 DVB-S/S2 input channels and 32 agile DVB-C output channels.

The products are intended for indoor usage only.

 

2.

  

Safety instructions

Installation of the 

headend must be done according 

IEC60728-11 and national safety standards.

Headend

 is powered from mains 230 V~. This voltage is dangerous to life. 

Any repairs must be done by a skilled personnel only. 
To avoid the electric shock follow these instructions:

   Do not plug transmodulator into the mains supply if the power cord or plug is damaged.

   To disconnect the headend

 from the mains completely, disconnect plugs from mains socket

.

   The mains sockets must be easily accessible.

   The headend

 shall not be exposed to dripping or splashing water and no objects filled with 

 

liquids, such as vases, shall be placed on it.

   Avoid placing device next to the central heating components and in areas of high humidity.

   No naked flame sources, such as lighted candles, should be placed on 

headend.

   If the device has been kept in cold conditions for a long time, keep it in a warm room no less than 2 

 

hours before plugging into the mains.

   D

o not insert any objects into ventilation openings

.

   T

he ventilation should not be impeded by covering the 

headend

 with items, such as newspapers, 

       table-cloths, curtains

.

 

 This

 product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled  

 

 

  or discarded according to applicable local and national regulations.

   Equipment intended for indoor usage only.
 

This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN62368-1, 

 

RoHS norm EN50581.

  

Protective earthing. Connect to protective earthing bar. 

 

This product is in accordance wit

h Custom Union Technical Regulations: “Electromagnetic compatibility of technical 

 

equipment“ CU TR 020/2011, “On safety of low-voltage equipment“ CU TR 004/2011.

 

This product 

is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.

Содержание S3C32VB




















Отзывы: