22
EOS-EWS_42-53_U161600
4.3 EXTRACTOR DIMENSIONS
DIMENSIONS EOS/EWS
42
53
Dimension A
1142 mm
1380 mm
Dimension B
1144 mm
1380 mm
Dimension C
400 mm
400 mm
Dimension D
1060 mm / 42”
1340 mm / 53”
Dimension E
515 mm
515 mm
Dimension F
109 mm
114 mm
Dimension G
225 mm
292 mm
Dimension H
692 mm
795 mm
Weight
45-55 Kg
68-81 Kg
4.4 MOTOR INCORPORATED INTO THE EXTRACTOR
The electric motor (pos.23) installed inside the extractor provides
kinetic energy to the propeller blades via the drive belt (pos.21).
NOTE
For specific information relating to extraordinary maintenance
on the electric motor and related spare parts, please contact
your local Distributor or Sales representative.
4.5 LIMITS OF USE OF THE EXTRACTOR
The machine has been designed to work in the following conditions:
•
Environmental temperature between 0°C and +40°C.
•
Maximum relative humidity 80% at a maximum temperature
of +40 ° C.
•
Maximum altitude 1000 m a.s.l
4.6 SOUND EMISSIONS GUIDELINES
The noise level of the air extractor, if used according to
instructions in this Manual shall not exceed 74,8 dB Lpa (53/2
model) and 72,7 dB Lpa (model 42/1).
5.1 TRANSPORT AND LIFTING
CAUTION
During the loading, unloading, transport, handling and
assembly phases of the machine, there are mechanical type
risks. Loss of stability problems may occur during transport
phases for installation purposes.
Therefore, transport and lifting operations must be performed
by qualified and properly trained personnel, equipped with
suitable means for the purpose such as pallet trucks, lift trucks
and aerial platforms.
CAUTION
To not be exposed to risk the personnel used for lifting and
transport of the machine has prescribed the use of personal
protective equipment (PPE).
NOTE
The weight of the machinery or each package is also indicated
on the sticker specifications.
NOTE
In no event shall TERMOTECNICA PERICOLI S.R.L. be
held responsible for damage to property and/or persons due
to improper handling procedures of the machine or use of
unsuitable equipment.
The extractor is delivered by TERMOTECNICA PERICOLI SRL
in one of the following ways, according to the supply contract:
1. PRE-ASSEMBLED PRODUCT
Single module packaged and placed on a standard pallet, in the
case of multiple machines, the packaging may have different
configurations on standard pallets.
2. PRODUCT TO BE ASSEMBLED
Various modules categorized according to content components
and of various sizes, packaged and placed on pallets.
CAUTION
In the manual lifting phases, objects can pose risks to health
caused by improper lifting technique.
Therefore, it is prescribed that the lifting of objects weighing
more than 20 kg is carried out by 2 or more operators.
5.2 PACKAGING AND DISPOSAL CHECK
The machine must be delivered securely packed and in perfect
condition. Despite the caution exercised, it is possible that both the
packaging and its contents are damaged during transport.
Upon receipt of the equipment, examine the transport container
to check for any visible damage.
Open the transport container and examine the contents for any
signs of damage inside. If damage is found, contact TERMOTECNICA
PERICOLI S.R.L. to determine the appropriate type of intervention.
TERMOTECNICA PERICOLI S.R.L. reserves the right to carry
out an inspection.
The packaging must be disposed of with due respect for the
environment. Recycling of packaging in the production cycle saves
raw materials and decreases the amount of waste.
Refer to the requirements of standards in force in the country of
installation of the machine.
A
B
C
D
E
F
G
H
G
Содержание EOS 42/0,5
Страница 63: ......