TERMOTECHNIKA Ecomat 15, Руководство по эксплуатации и обслуживанию

Страница: 25 / 33

25
- loosen the ignition
device bolt (arrowed in
the below picture);
- remove the ignition
device from the housing
and pull its cord from the
stuffing box located in
the burner side wall;
- place new ignition
device by pushing firmly,
notice the bolt located on
the pipe which
adjusts the ignition
device longitudinally;
hold it still making sure it does not change its position and tighten the bolt carefully (caution:
it’s made of porcelain); the bolt should press the ignition device body within its cavity (as
shown in the picture);