26
ATTENTION! Read instruction through carefully and follow recommendation of a
manufacturer of chemical purifiers. Not recommend using compositions for carbon
burning-off are self-made.
9.2. Service maintenance of door translucent screen
To prevent soot accumulation at the translucent screen (glass) it is necessary to clean it from time to
time.
Accumulation of acidulous thin coating (of soot) will as the result erode and weaken the glass of the
translucent screen.
It is important to obey the following instructions so that the glass can be used for a long period of
time.
On the regular basis inspect the glass for chips and cracks. Provided any cracks or chips are found
immediately put out the stove and address the manufacture for glass replacement issue.
Don’t slam the door; don’t otherwise hit the glass. When shutting the door make sure that billets and
other objects do not stick out from the fire chamber so that not to damage the glass.
Don’t start up fire near the glass or in such a manner that during the burning process it may be close to
the glass.
When cleaning the glass do not use materials that can scratch or in other way damage the glass.
Scratches on the glass may during the use lead to glass destruction.
Never try to clean the glass while it is still hot. Before kindling the glass shall be completely dry.
Never put into the stove materials that can ignite explosively. Even small explosion in the closed space
is capable to smash out the glass.
Glass cleaning from sooty deposits shall be carried out as and when necessary by soft cloth wetted
with special solution for fireplace and stove glasses in accordance with the instruction.
It is prohibited to use the stove with damaged translucent screen. In case of glass damages for its
replacement it is necessary to install only high-temperature ceramic glass with thickness of 4 mm and
correct dimensions. For correct replacement order see cl. 10.
Do not use instead of the glass the heat-strengthened glass or thickened window glass. Contact the
manufacturer for the glass replacement issue.
10. CURRENT REPAIR
A damage of a varnish-and-paint coating, at the time of operation, would lead to emergence of
corrosion. It is not the warranty case. The manufacturer recommends refreshing the paint of the carcass with
a heat-proof organosilicone enamel of type KO-868.
The built-in heat exchange unit undergoes the highest temperatures exposure that is why the metal it is
made of during the stove operation may change its shape or burned through. If such an event took place the
heat exchanging unit shall be replaced. Such damage appears as the result of breach of service instructions
and is not a warranty event.
Heat exchange unit replacement is carried out analogously to the re-installment described in cl. 8.9.
In case of translucent screen (glass) damage at the door of «Vitra» model it shall be replaced as
follows (see figure 15):
