GB INSTRUCTION MANUAL
18
1. High speed indicator light (high efficiency operation=HI-EFFICIENT)
2. Low speed indicator light (low noise operation = SILENCE)
3. Display
4. Cloth-Dry mode indicator light
5. AUTO mode indicator light
6. Full water tank indicator light
7. Timer function indicator light
8. Operation and stand-by indicator light
9. Timer function key
10. Speed selection key
11. Up key
12. Down key
13. Mode selection key
14. Power – on/off key
OPERATION INSTRUCTIONS
1.
10.
12.
9.
11.
13.
14.
2.
5.
4.
3.
8.
6.
7.
GB INSTRUCTION MANUAL
19
In standby state press the Power button to start, and during operation
of the dehumidifier press the Power button to shut down. For initial
startup the default is low wind, the display show the environment
temperature and the default set humidity is RH50%. If the dehumidifier
is not energized for the first time, after startup the state is kept the
same as that before shutdown
(memory)
. The LED is closed, only power light
is illuminated when standby.
In boot state or regular boot, press this button to chose autumatic
dehumidification or continuous dehumidification (dry function), each
function have 2 second confinnation delay time.
In boot state, press this button, the LED light and blink. In blink time,
press up/down button to set the time of timing. press up/down buttom
to add/reduce one hour . Keep pressing the up/down button to
add/reduce time as well. The maximum is 24 hour, the minimum is 1
hour. LED blink 5 time to confinn the timing set. Press the timer button
again to reset the timing time in timing status.
Press up/down button( each press for 5%RH to select humidity from
30-80%RH only in automatic dehumidification.
Press this button to choose fan speed, high-low-high, only valid in
automatic dehumidification. Keep pressing fan speed button for 5s to
start inside dry. This dehumidifier will memorize the humidity and speed set-
tings as well as the Mode it was running under before its power was turned off.
INSIDE DRYING FUNCTION
Cleaning the inside of the machine from concentration of mildew or other mi-
croorganisms lasts for approximately 45 minutes recommend internal drying
once every month. High speed – suitable for fast and high-efficient clothes
drying.
Once you activate your unit, the display will show the relative humidity level in
your room. You may select the relative humidity level in your unit only when it
runs under AUTO mode. When the relative humidity in your room is 5% below
the one you have set the compressor will stop working . Once the relative
humidity in your room is 5% higher than the one you have set compressor will
start working again after 3 minutes. Only the Fan will continue to run too keep
air circulation at an effect of 30W /h.
POWER
MODE
TIMER
UP/
DOWN
WIND
HUMIDITY
SETTINGS
Содержание 562100
Страница 32: ...62 63 ...
