TERMET ECOCONDENS SILVER PLUS-20, Инструкция по эксплуатации

Страница: 12 / 31

ECOCONDENS SILVER PLUS
ISU-646:2016/GR-H str.10
This prepared cables connect according to the following diagram.
Fig 3.1.3.1 Wire colors: L – brown; N – blue; PE – yellow-green
3.2. Preliminary check activities
Before starting the installation work, check:
•
whether the boiler is factory designed for the type of gas supplied from the gas system. The type of gas which the boiler is
adjusted to is specified on the rating plate on the cover of the boiler;
•
whether the water system and radiators have been properly rinsed with water in order to remove rust, fillings scale, sand and other
dusts that could disturb the proper operation of the boiler (for example increase the water flow resistance in central heating
system) or to pollute the heat exchanger,
•
whether the mains voltage has a value of 230V and that the socket has an efficient safety contact (complies with PN-IEC-60 364-6-
61: 2000).
3.3. Mounting the boiler on the wall
Hang the boiler on hooks fastened durably in the wall using a beam placed in upper part of the boiler. The boiler shall be so located as
to permit the eventual repair without any need to dismantling from the installation.
67
60
53
ca100
60
53
334
5
6
A
G1/2
G3/4
A
A
29
151
7
1
2
400
361
ca100
c
a
2
0
0
0
m
m
140
200
Fig. 3.3.1 Installation dimensions of boiler ECOCONDENS SILVER PLUS
3.4. Connection to the gas installation
Connect a gas supply pipe directly to the connector of the boiler gas unit using of connector subassembly no 0696.00.00.00 (in
boiler equipment).
It is necessary to install a gas filter on the gas supply pipe. This filter is not included in the standard boiler equipment.
The gas filter is necessary for a proper operation of a gas unit and a burner.
Install a cut-off valve on the gas pipe in an accessible place.
3.5. Connection of the boiler to a water system of central heating
•
Power supply and return connectors of the central heating boiler should be screwed to the installation. Location of the connectors
Figure 3.3.1.
Wire of electric system
Power wire the
device
Junction box