5
Connecting the TV44
Depending on the type of satellite dish you have, go to one of the
following five scenarios to determine how to connect the TV44
antenna to your satellite dish.
A-Single LNB (Phase1) Satellite Dish
1. Remove the LNB from the arm of the satellite dish to expose
the satellite cables.
See Fig 6.
2. Disconnect the satellite cable(s) from the satellite dish’s LNB
and pull them out through the bottom of the satellite dish arm.
See Fig 6.
3. Connect the satellite cables to the terminals marked OUT 1 and
OUT 2 on the TV44 antenna.
See Fig 7.
Fig 6.
Fig 7.
Logo Side
Dish Side
T4-0048-TV44-OM.qxp 4/28/04 11:31 AM Page 5
All manuals and user guides at all-guides.com
all-guides.com
