TERION UM20-100111B, Руководство по установке, Страница: 50 / 78

To activate a unit, use the down arrow key to select the Activate Unit command, then
press the
ENTER
key. The Unit Activation dialog box appears. Fill out the form with
the appropriate information using the steps below (Only trained installers are certified
Name: Type the insta
to utilize this screen).
2. ller’s name that was assigned during installer training, and then
3. e installer’s password that was assigned during installer training,
4.
press the
TAB
key.
Password: Type th
and then press the
TAB
key.
Customer #: ber from Terion Customer Support.
cluding the
6. Unit Name: ation from the customer.
7. With the Accept
ENTER
. If not, press
8. f all the
n Success
Obtain this num
5. ITU Serial #: Type the ITU serial number exactly as it appears, in
“DHF-” (i.e., DHF-001231), and press the
TAB
key.
Type the truck’s unit name (Get this inform
Typically, it is the truck number), then press the
TAB
key.
box highlighted, if you wish to continue, press
TAB
to highlight the Cancel box, and then press
ENTER
to start over again.
When the Accept command is executed, the Unit Activation box is cleared o
information. An activation request message is sent to the Terion Network Operations
Center (NOC). When the activation request message is received at the NOC, the
NOC automatically sends a return message. The message is either an activation
success message or an activation failure message. If the message is an activation
success, the installation is complete. Otherwise, it is an activation failure and you
need to correct the problem and resend the activation request.
Note: It may take several minutes before the Activatio
or Fail message is returned from the NOC.
11-2
Mobile Messaging System Installation Manual June 15, 2001
UM20-100111B Terion, Inc.