TERION UM20-100111B, Руководство по установке, Страница: 46 / 78

Next, determine the ITU software version. Press the
F2
key and then the
7
key, and the ITU
Statistics Page – Transmitter page appears. Press the
PAGE DOWN
keys and the
ITU Statistics Page – Receiver page appears. The ITU software version is listed in the lower
left corner of the message box.
ITU Address
(a 3000000
number)
Mobile
Messenger/Mobile
Workstation
software version
If
both the DT and ITU software versions match those that you downloaded from the Terion
Webdownload site prior to installation (see Verification of Software Versions on page 3-1),
then proceed directly to Section 10, Calibration. Otherwise, begin upgrading the software.
The upgrade software and instructions are available at
www.terion.com/webdownload/ .
Refer to the Webdownload Site User Manual, UM20-100115, by logging on to
www.terion.com/webdownload/ and clicking on Documentation .
Note: If the ITU is upgraded to version 7.2, the ITU MUST be calibrated
after the upgrade. This is necessary because a new calibration process was
incorporated beginning with version 7.2.
9-2
Mobile Messaging System Installation Manual June 15, 2001
UM20-100111B Terion, Inc.