TERION UM20-100111B, Руководство по установке, Страница: 27 / 78

21. With everything tightened, test the installation by grabbing the antenna by hand and
trying to turn it. If the antenna Stud Mount Assembly turns in the mounting
bracket, it is too loose and needs to be tightened (see step 13) .
22. Place the coax into split tubing, secure the coax cable with tie wraps, and seal the
entry hole.
4.3.3 Attaching Antenna Base Mount to Aluminum or Steel Bodies with
Accessible Backsides
Side mount antenna base mounts are fastened to tractor metal fenders the same way as the
installation for attaching antennas to composite body panels
except that the quad radial wires
are removed from the quad radial assembly (the quad radial wires degrade FM reception
when the antenna base mount is fastened to an aluminum or steel truck body panel).
The quad radial wires are cut so that approximately 1/8" or less remains, and dielectric grease
is applied to the cut ends.
CAUTION! The quad radial wires MUST be removed from the assembly in order
to obtain maximum FM reception on aluminum or steel bodies where side mount is
attached.
4-11
Mobile Messaging System Installation Manual June 15, 2001
UM20-100111B Terion, Inc.