Terex Telelift 3713 SX, Руководство по обслуживанию

Страница: 88 / 212

TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
4
Document 57.4402.9200 - 1 st Edition 10/2006
INDEX
. MAINTENANCE TABLE
TABLE A
During the first 10 working hours:
A-1 Check the oil level within reduction gears, power divider and differential gears.
A- Check the tightening of the wheel bolts.
A- Check the tightening of all bolts and nuts.
A-4 Check the couplings for oil leaks.
Every 10 working hours or daily:
A-5 Inspect the Operator Manual.
A-6 Inspect the decals and placards.
A-7 Check the engine oil level.
A-8
Clean the air suction filter.
A-9 Check and clean the radiator.
A-10 Check the hydraulic oil level in the tank.
A-11 Check the greasing of the boom section pads.
A-1 Grease the forks.
A-1 Grease all joints of the boom, the rear axle shaft joint, the transmission shafts, the front and rear axles and
any equipment of the machine.
A-14
Check the efficiency of the lighting electric system.
A-15
Check the efficiency of braking system and parking brake.
A-16
Check the efficiency of the steering selection system.
A-17
Check the efficiency of the fork balancing system.
A-18
Make sure the safety devices installed are in efficient working order.
A-19 Check the engine coolant level.
A-0
Check the efficiency of the overload warning system.
A-1 Check or re-sequence the boom telescopes.
Courtesy of Crane.Market