manualshive.com logo in svg

Terex RT200-1, Руководство оператора

Поделиться
Скачать
Terex RT200-1 Скачать руководство пользователя страница 8

Nomenclature

This manual contains instructions and information on the operation, maintenance,
lubrication and adjustments of the Rough Terrain Crane. The operator should not attempt
to operate the machine before he has gained a thorough understanding of the material
presented in the following pages.

To aid in understanding the contents of this manual, the following terms will always have
the meanings given whenever they are used.

1. UPPERSTRUCTURE

The upperstructure weldment, swing
mechanism, counterweight, cab.

2. BOOM ATTACHMENT

The telescopic crane boom with hydraulic
winch, lift cylinder, hook block assembly, jib
arrangement.

3. CARRIER

The chassis complete, power unit, swing
bearing, transmission, planetary axles,
outrigger assemblies.

4. OUTRIGGERS

The beams, cylinders, floats, boxes,
hydraulic control system.

RIGHT HAND/LEFT HAND

All references to right or left hand will
correspond to the operator’s right or left
hand when he is facing forward from the
operator’s seat, with the rear mounted
engine to his back.

7

P/N 12261-319 REVISED: August 2012

Courtesy of Crane.Market 

Содержание RT200-1





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды