manualshive.com logo in svg

Terex RT200-1, Руководство оператора

Поделиться
Скачать
Terex RT200-1 Скачать руководство пользователя страница 15

Alert System

SAFETY ALERT SYMBOL

The safety alert symbol is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death

SAFETY ALERT SYMBOL

MACHINE DECAL HAZARD CLASSIFICATION SYMBOLS

A multi-tier hazard classification system is used on machine decals to communicate
potential personal injury hazards. The following signal words used with the safety alert
symbol indicate a specific level of severity of the potential hazard. Signal words used
without the safety alert symbol relate to property damage and protection only. All are used
as attention-getting devices on decals and labels fixed to the machinery to assist in
potential hazard recognition and prevention.

1.

DANGER - Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.

2.

WARNING - Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

3.

CAUTION - Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.

Safety

14

P/N 12261-319 REVISED: August 2012

Courtesy of Crane.Market 

Содержание RT200-1





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды