manualshive.com logo in svg

Terex RT200-1, Руководство оператора

Поделиться
Скачать
Terex RT200-1 Скачать руководство пользователя страница 6

Construction and Industrial Equipment Product Safety

SAFETY ALERT SYMBOL

The safety alert symbol is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death

SAFETY ALERT SYMBOL

It is the responsibility of the owner of the construction and industrial equipment products to
be knowledgeable about federal, state and local regulations that effect the total usage of
his equipment, and responsibility to working personal and the public. Since regulations are
subject to change, and also differ from one local to another, this manual makes no attempt
to provide such information.

Terex Cranes provides appropriate operation and maintenance manuals for various
construction and industrial equipment products that it manufactures and sells. In addition,
where applicable, appropriate national consensus standards, industry standards and safety
related manuals are included with the Terex manuals in the shipment of each product. It is
company policy to provide this information for the owner or user of the equipment. It is
expected that the owner or user will utilize these manuals and standards to provide the
appropriate information and training to those people who are to operate, maintain and
supervise the use of equipment in a proper and safe manner.

Construction and industrial equipment is designed and manufactured to perform heavy-
duty work. Under normal usage, the equipment will wear. For this reason it is essential that
the owner/user establish and perform a periodic inspection of the equipment. The objective
of inspection programs is to prevent accidents, reduce downtime and keep the equipment
working efficiently. These inspection programs should be designed to discover worn,
cracked, broken or deteriorated parts and loose or missing fasteners before they result in a
problem.

Proper training and inspection programs are essential to avoiding injury to persons,
damage to property and excessive maintenance costs.

Read and understand the manuals provided with this equipment. Assistance is available
from the distributors of your Terex product and from the Terex manufacturing facility.

When operating a hydraulic crane, the operator should realize that hydraulic and
structural competence, NOT TIPPING LOAD, is often the determinant of lifting
capacity. Therefore, THE OPERATOR MUST BE GUIDED SOLELY BY THE
APPROPRIATE MANUFACTURER’S LOAD RATING CHART when considering
load weights. The manufacturers rated loads must never be exceeded.

Introduction

5

P/N 12261-319 REVISED: August 2012

Courtesy of Crane.Market 

Содержание RT200-1





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды