Terex RL4 LED, Руководство оператора

Страница: 26 / 49

Operator's Manual First Edition • First Printing
Inspections
24 RL4LED™ Vertical Mast Part No. 1286390GT
Test Machine Functions
By raising and lowering the mast back to the
stowed position, the following functions will be
tested:
winch, mast extension and mast
rotation.
10 Turn the winch handle clockwise until the mast
raises approximately 2 feet / 60 cm.
Result: A clicking sound should be heard as
the mast raises.
11 Release the winch handle.
Result: The winch brake should hold the mast.
12 Continue to turn the winch handle clockwise
until the mast reaches full vertical position.
Result: The mast sections should raise
smoothly, free of hesitation or binding.
13 Turn the T-handle to release the mast rotation
lock.
14 Rotate the mast clockwise and then
counterclockwise as far as it will go in either
direction.
Result: The mast should rotate smoothly and
easily in both directions.
15 Rotate the mast to line up the arrows on the
front of the mast.
16 Tighten the T-handle to secure the mast.
17 Attempt to rotate the mast in both directions.
Result: The mast should not rotate.
18 Begin lowering the mast to the stowed position
by turning the winch handle counterclockwise.
Result: No clicking sound should be heard
when the winch handle is turned.
Test the Lights
19 Make sure the light switches are in the off
position.
Note: Be sure the LED modules connections are
properly tightened before turning the lights on.
20 Start the generator's engine. Refer to the
generator manufacturer's operator's manual
before starting the engine.
21 Turn the light switch to the on position.
Result: The lights should come on.