Terex L13I, Руководство пользователя

Страница: 13 / 21

Tech-Tip 93 13 Released: 6/19/2019
Tech Tips
Step 8
Once testing is complete bring the upper and
lower booms down to the ground mount position.
Disconnect the voltage source from the boom.
Step 9
Remove the following jumpers:
• Turntable above rotation to pedestal below
rotation (#1)
• Lower boom insert (#3)
• Upper boom to knuckle (#4)
• Knuckle to lower boom (#5)
• Platform bracket to boom tip bracket (#6)
• Jib bracket (if equipped) to platform bracket
(#7)
See Figure 2 to identify jumpers.
Step 10
To begin setup for testing the lower boom, raise
the upper boom up to a 45 degree angle. Raise
the lower boom high enough to clear all
obstacles and rotate the turntable 180 degrees
so that the knuckle is off the back of the unit as
shown in Figure 4 .