Document 57.4402.8200 - 1
st
Edition 03/2007
INDEX
GYRO 4020 - 4518
TECHNICAL SPECIFICATIONS
2
52
Now you can start using the
WINSCOPE
programme to
set the machine parameters.
The main window is similar to the one shown below.
There are 7 drop-down menus at the top of the
window.
The first main menu is the
DIAGNOSTIC
menu; the
sub-menus are shown in the picture to the side and are
relevant to the inputs and outputs of the main electronic
board, as well as other features.
You find the
IN/OUT
description, with the PIN number
and a small flag showing if
IN/OUT
is active or not.
Additionally, there is a small box where you can view
the
CAN
messages from the
BOOM
and to the
BOOM
.
ArmC
corresponds to the front axle.
ArmC2
and
ArmB3
have equivalent windows; the first
is relevant to the rear axle; the second to the machine
boom.
These windows display information on the boom
position (redundant), the weight value, the pressure
transducers, the stabilizers position and the activation
of the stabilizer valves.
