Terex Genie Z-45XC Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 60

background image

First Edition • First Printing

Operator's Manual

Controls

Part No. 1301594GT

Z

®

-45 XC

™

27

12

Work light switch (if equipped)

Move the work light switch up to activate the
lights. Move the work light switch down to turn
off the lights.

13

Red Emergency Stop button

Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.

14

Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive
function and thumb rocker for steer function.

Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Move the control handle
in the direction indicated by the blue triangle
and the machine will steer to the left. Move the
control handle in the direction indicated by the
yellow triangle and the machine will steer to
the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Press the left side of the
thumb rocker and the machine will steer to the
left. Press the right side of the thumb rocker
and the machine will steer to the right.

15

Drive speed select switch

Machine on incline symbol: Low range
operation for inclines.
Machine on level surface symbol: High range
operation for maximum drive speed.

16

Drive enable switch

To drive when the drive enable light is on, hold
the drive enable switch to either side and
slowly move the drive control handle off center.
Be aware that the machine may move in the
opposite direction that the drive and steer
controls are moved.

17

Drive enable indicator light

Light on indicates that the boom has moved
just past either non-steer wheel and drive
function has been interrupted.

18

Diesel models: automatic glow plug light or
glow plug switch

Move the glow plug switch to either side and
hold for 3 to 5 seconds.

Or for models with LCD readout screen, light on
indicates that glow plugs are on. Start engine
when light goes off.

19

Engine idle (rpm) select switch

Move the engine idle select switch to the turtle
position for foot switch activated low idle.
Move the engine idle select switch to the rabbit
position for foot switch activated high idle.

20

Engine start switch

Move the engine start switch to either side to
start the engine.

«
...
27
28
29
30
31
...
»

Содержание Genie Z-45XC





























































Отзывы:

Нет отзывов

Похожие инструкции для Genie Z-45XC

Бренд: Rotary Страницы: 12

Бренд: Krömer Страницы: 4

Бренд: QUALITY LIFTS Страницы: 13

ELEVATING WORK PLATFORM

Бренд: POP UP Страницы: 24

Бренд: Mohawk Страницы: 39

Бренд: LGMG Страницы: 33

Бренд: LGMG Страницы: 33

Бренд: LGMG Страницы: 35

Бренд: LGMG Страницы: 38

Бренд: LGMG Страницы: 48

Бренд: GMG Страницы: 31

Бренд: GMG Страницы: 34

Бренд: GMG Страницы: 37

Бренд: GMG Страницы: 68

Бренд: Upright Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды