XM158 V1.0-NR
15
･
Turn the encoder to select “Master” or “Alone”. The selection "Alone" means Stand Alone-mode and "Master" that
the device is defined as master.
･
Press the Enter button to confirm.
･
Press the Mode/Esc button in order to return to the main menu.
3. Program selection for Auto Pro Part
･
Select “Edit program” by turning the encoder.
･
Press the Enter button to confirm.
･
Select “Select programs” by turning the encoder.
･
Press the Enter button to confirm.
･
Turn the encoder to select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and thus select which Slave
program is to be sent. Selection “Part 1” means, that the Slave unit runs the same program as the master units.
･
Press the Enter button to confirm.
･
Press the Mode/Esc button in order to return to the main menu.
4. Program selection for Edit Program
･
Select “Edit program” by turning the encoder.
･
Press the Enter button to confirm.
･
Select “Edit program” by turning the encoder.
･
Press the Enter button to confirm.
･
Turn the encoder to select the desired program. With this function you can edit specific scenes into a specific
program.
･
Press the Enter button to confirm.
･
Press the Mode/Esc button in order to return to the main menu.
5. Automatic Scene Recording
･
Select “Edit program” by turning the encoder.
･
Press the Enter button to confirm.
･
Select “Edit scenes” by turning the encoder.
･
Turn the encoder to select the desired scene numbers. You can program a maximum number of 250
･
Turn the
encoder to select the desired scene numbers. You can program a maximum number of 250 scenes.
･
Press the Enter button to confirm.
･
Press the Mode/Esc button in order to return to the main menu.
Example:
Program 2 includes scenes: 10, 11, 12, 13
Program 4 includes scenes: 8, 9, 10
Program 6 includes scenes: 12, 13, 14, 15, 16
Auto Pro Part 1 is Program 2;
Auto Pro Part 2 is Program 3;
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture:
